Equipment


Kyle’s Equipment:

Logo 600 V-Bar
• Scorpion 4035-560kv motor
• 12 tooth Mod 1.0 pinion
• Kontronik Jive 120+HV ESC using the internal BEC @ default 5.6volts
• 10S (2X5S) Thunder Power 5000 mah (45C) batteries using 4mm bullet connectors
• Edge 603mm flybarless main blades
• Edge 95mm tail blades
• JR 8717 cyclic servos (standard version)
• JR 8900G tail servo with Western Robotics voltage step-down
• Head speed 2200 for 3D, 2000 for cruising
• +/- 14 degrees collective pitch

Logo 500 V-Bar with carbon tail upgrade
• Scorpion 4020-1100kv motor
• 15 tooth Mod .7 pinion
• Kontronik Jive 100+LV ESC using the internal BEC @ default 5.6 volts
• 6S Thunder Power 5000mah (45C) batteries using 4mm bullet connectors
• Edge 553mm flybarless main blades
• Edge 92mm tail blades
• JR 8717 cyclic servos (standard version)
• JR 8900G tail servo with Western Robotics voltage step-down
• Head speed 2300 for 3D, 2000 for cruising
• +/- 14 degrees collective pitch

Logo 400 V-Bar with carbon tail upgrade
• Scorpion 3026-1400kv motor
•18 tooth  Mod .5 pinion
• Kontronik Jive 60+LV ESC using the internal BEC @ 5 volts
• 6S Thunger Power 2650mah (45C) batteries using 4mm bullet connectors
• Edge 423mm flybarless main blades
• Edge 72mm tail blades
• JR 3517mg cyclic servos
• JR 8900G tail servo
• Head speed 2750 for 3D, 2400 for cruising
• +/- 14 degrees collective pitch

Logo 600SE V-Bar
• Scorpion 5020-450kv motor
• 14 tooth Mod 1.0 pinion
• Kontronik Jive 120+HV ESC using the internal BEC @ default 6volts, w/4Cell 1500mah  NIMH buffer pack
• 10S (2X5S) Thunder Power 5000 mah (45C) batteries using 4mm bullet connectors
• Edge 693mm flybarless main blades
• Edge 105mm tail blades
• JR 8717 cyclic servos (standard version)
• JR 8900G tail servo with Western Robotic voltage step-down
• Head speed 1900 for 3D, 1700 for cruising
• +/- 12 degrees collective pitch

Transmitter
• JR 9303

Charging Equipment
• Thunder Power TP-1010C charger
• Thunder Power TP-210 balancer
• IOTA DLS-45 (45amp) 600 watt power supply